Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the auxiliary battery of the Mercedes E-Class

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Battery

The following instructions will show us the procedure for disassembling and replacing the auxiliary battery of the Mercedes E-Class. First, we get on board the vehicle and start by removing the plastic side panel located to the left of the dashboard; then we will find the small auxiliary battery on the back of the metal plate, which we will disconnect to remove, as shown in the video. At this point, we install the new battery, of the correct type and with the same amperage, inserting it in the correct direction and making the electrical connection.

Posted on 22 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the auxiliary battery of the Mercedes E-Class?
How do you replace the auxiliary battery of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. of the auxiliary battery on the Mercedes E-Class is done by opening the rear hatch, so that access to the components in the trunk area can be obtained:.. …
Where is the Auxiliary Battery Located on the Mercedes E-Class?
Where is the Auxiliary Battery Located on the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. the auxiliary battery in your Mercedes E-Class... …
Replacing the Auxiliary Battery on Mercedes E-Class
Replacing the Auxiliary Battery on Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. to replace the secondary battery on a Mercedes E-Class? Remove the battery from the trunk or from the vehicle's floor. Open the car door or hatch and.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe E 2016-2023 - Where is the auxiliary battery of the Mercedes Benz E-Class W213 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos