Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Console in the Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to remove the center console in the Mercedes E-Class, a very simple and quick operation. First, go inside the cabin, then pry off the plastic trim above the climate controls and remove them by unscrewing the corresponding screws.

Next, unscrew all the indicated mounting bolts, disconnect the rear air vents, and after removing the last lower bolts, separate the console from the base. To install the replacement, simply follow the reverse procedure.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to Remove the Center Console of the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. console of the dashboard in the Mercedes E-Class. First, get inside the cabin and start by removing the plastic cover of the center tunnel. Next,.. …
How to Replace the Window Switch Console in a Mercedes E-Class?
How to Replace the Window Switch Console in a Mercedes E-Class?
Mercedes Classe E (2016-2023 / W213) .. the window switch console in a Mercedes E-Class W213, a very simple and quick operation. To do this, you will only need a plastic trim tool to.. …
Removing the Dashboard of the Mercedes E-Class
Removing the Dashboard of the Mercedes E-Class
Mercedes Classe E (1976-1985 / W123) .. replace the entire dashboard of the Mercedes E-Class. First, get inside the vehicle and start by removing the steering wheel by loosening the center.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos