|
Do it yourself
| |||
| ||||
How to Remove the Window Regulator Motor on a Mercedes Vito
Model: Mercedes Vito
W639, MK 2
- Years 2003-2013
Do you want to remove the window regulator motor from your Mercedes Vito? Let's go through the correct steps in this video. Before starting the disassembly, disconnect the battery terminals. Use a screwdriver and bits to unscrew the internal door handle, being careful not to scratch it. Remove the handle with a plastic lever, unscrew the screw in the slot, and once removed, unscrew the one for the internal door opening lever. Detach the door panel, disconnect the window regulator and speaker terminals. Do not lose any of the clips behind the plastic panel that you removed earlier. Remove the plastic covering and unscrew the pins with the screwdriver. Use a socket wrench and appropriate bit to unscrew the pins of the glass track. Remove the glass seals both inside and outside. Remove the glass by sliding it upwards, being careful not to break it. Unscrew the window regulator motor using the socket wrench, disconnect the power terminals, and pull it out of its housing. Slide out the track and window regulator from the door frame. Reassemble everything in reverse order.
Updated on 27 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Vito
(2003-2013 /
W639, MK 2)
Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…
Mercedes Vito
(1995-2003 /
W638, MK 1)
If you own a Mercedes Vito W638 and need access to the fuses but don't know where the box containing them is located, all you have to do is follow th…
Mercedes Vito
(1995-2003 /
W638, MK 1)
These brief and simple steps will show you how to remove and replace the battery in a Mercedes Vito. First, locate the battery, which is positioned u…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.227
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |