Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the battery of the Mercedes C-Class key

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Key
Operation: How to replace the battery of the Mercedes C-Class key

For this simple operation it will be sufficient to follow the steps illustrated in this short video guide, as a first operation press the button on top of the key to be able to extract the emergency key with which you can open your car if the battery is exhausted, in this mode you can extract the key and use it to lift the rear panel of your key, in this way you can have access to the slot in which the battery is housed, then install the new battery and retrace the steps described in reverse for the reassembly of the various components.


Posted on 9 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2000-2007 - Why does the Mercedes C-Class remote control no longer work? Read Answer
    • Classe C 2014-2021 - How much does a Mercedes C-Class key cost? Read Answer
    • Classe C 2007-2013 - How to remove the ignition lock of the Mercedes C-Class W204? Read Answer
    • Classe C 2007-2013 - What locking problems can the Mercedes C-Class boot have? Read Answer
    • Classe C 2014-2021 - What to do if the Mercedes Benz W205 car no longer detects the key? Read Answer
    • Classe C 2014-2021 - Why does the Mercedes C-Class W205 not detect the key? Read Answer
    • Classe C 2014-2021 - How to replace the ignition lock on the Mercedes C-Class? Read Answer
    • Classe C 2014-2021 - How to replace the battery in the key of a Mercedes C-Class? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos