|
Do it yourself
| |||
| ||||
How to Replace the Front Bulbs on a Mercedes A-Class
Model: Mercedes Classe A
W177
- Years:
2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
To replace the front bulbs on your Mercedes A-Class, follow these steps. Pull the hood release lever, lift the hood, and secure it. Turn the wheels to gain easier access to the inside of the fender. Remove the headlight cover: unscrew the screw at the top of the cover and take it out. Remove the protective cap on the back of the headlight. At this point, you can remove the affected bulb. Replace the bulb: install the new bulb. Reverse the steps: put the protective cap back on, insert the cover, and screw in the screw. Close the hood.
Updated on 11 November 2026 by ScegliAuto
Related tutorials
Mercedes Classe A
(1997-2004 /
W168)
.. the front headlight bulbs on a Mercedes A-Class? Let's see how to proceed: open the hood by pulling the lever located at the bottom right of the.. …
Mercedes Classe A
(2012-2018 /
W176)
.. replace the dynamic turn signals on a Mercedes A-Class, use a flathead screwdriver to pry off the mirror cap. Then, detach the lower part of the cap,.. …
Mercedes Classe A
(1997-2004 /
W168)
.. replace the rear light bulbs of the Mercedes A-Class model W 168. To replace the bulbs, we need to open the trunk and remove the side cover, disconnect.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Replace the Headlight Bulb on a Mercedes A-Class W169?
If one or more bulbs in the front headlights of your Mercedes A-Class W169 (2004-2012) are not functioning correctly, you need to replace them. This is a very simple task that takes just a few minutes. First, park the car safely and turn it off completely. Next, go to the front and lift the hood. Remove the protective cover located inside the engine compartment and take out the faulty bulb. Finally, insert the new replacement bulb and properly reattach the protective cover. Close the hood, and you're done. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |