Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dynamic Turn Signals on a Mercedes A-Class?

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
This video is currently unavailable

To replace the dynamic turn signals on a Mercedes A-Class, use a flathead screwdriver to pry off the mirror cap. Then, detach the lower part of the cap, which contains the bulbs. Once the old bulbs are disconnected from the connectors, replace them by connecting the new bulbs to the connectors and inserting them into their housing.

Finally, reconnect the bulb holder to the cap and install the cap back onto the mirror.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Disassembly and Replacement of the Turn Signal in the Mercedes A-Class Side Mirror
Disassembly and Replacement of the Turn Signal in the Mercedes A-Class Side Mirror
Mercedes Classe A (2018-2026 / W177) .. in the external side mirror of the Mercedes A-Class. First, remove the plastic cover of the mirror by prying it off with something thin. Then, remove.. …
How to Remove the Radio from a Mercedes A-Class
How to Remove the Radio from a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. sit in the driver's seat of your Mercedes A-Class. Using a thin but sturdy tool, pry off the air vents located above the radio, then disconnect the.. …
How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. in the front headlights of a 2014 Mercedes A-Class. The replacement parts used for this maintenance task are: - ZES 2 LED low beam bulbs with active.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos