Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Mercedes A-Class

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Tail light bulb

Today we will explain how to replace the rear light bulbs of the Mercedes A-Class model W 168. To replace the bulbs, we need to open the trunk and remove the side cover, disconnect the connector, and remove the bulb plate from the inside to the outside of the trunk. We remove the bulbs by pulling them out of the plate and insert the new ones. We place the plate back inside the light and reconnect the connector. We reinstall the side cover and follow the same steps to replace the bulbs of the left light.

Posted on 19 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. in the front headlights of a 2014 Mercedes A-Class. The replacement parts used for this maintenance task are: - ZES 2 LED low beam bulbs with active.. …
Guide to Replacing the Low Beam Bulb on the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. and replace the low beam bulb on the Mercedes A-Class. In this video, the procedure is shown with the headlight removed from the body; however, the replacement.. …
How to replace the rear headlights bulbs of the Mercedes A-Class
How to replace the rear headlights bulbs of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. replace the rear headlight bulb of the Mercedes Class A model W 169. Pull the handbrake and turn off the engine, get out of the vehicle and start the.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos