Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light and bulbs of the Mercedes Class A

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Today we will see the steps that will show us how to disassemble and replace the rear taillight and its bulbs of the Mercedes Classe A. First, we open the rear trunk door and start unscrewing the plastic screw that we find behind the taillight; disconnect the electrical connector of the bulbs to remove the headlight, as shown in the video.

At this point, we separate the bulb holder from the light fixture, replacing any faulty bulbs with new ones (of the correct type and with the same fitting); reassemble the rear light and check the operation of the brake lights.


Posted on 20 October 2025 by ScegliAuto


Related tutorials

Replacing Rear Light Bulbs on Mercedes A-Class
Replacing Rear Light Bulbs on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Let's replace the bulbs in the rear light on the Mercedes A-Class. Lift the rear hatch, and remove the cover on the side of the cargo area. Use a soc…
How to replace the rear headlight bulb of the Mercedes A-Class
How to replace the rear headlight bulb of the Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) Today we will explain how to replace the rear headlight bulb of the Mercedes A-Class. To access the bulb, you need to open the trunk and remove the s…
How to Remove the Rear Headlight of a Mercedes A-Class
How to Remove the Rear Headlight of a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) Let's see how to remove the rear headlight of a Mercedes A-Class. Open the trunk and secure it; locate the access to the rear headlight (next to the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos