Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight of a Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Tail light

Let's see how to remove the rear headlight of a Mercedes A-Class. Open the trunk and secure it; locate the access to the rear headlight (next to the trunk lining); open the plastic inspection cover (located in the trunk) and remove the screws that secure the headlight. Use a lever to detach the headlight from its housing and disconnect the power connectors. After replacing the damaged headlight with a new one, install the new headlight into the vehicle's body and replace the bulbs (if damaged). Finally, test the proper operation of the bulbs you installed with the new headlight.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light and bulbs of the Mercedes Class A
How to replace the rear light and bulbs of the Mercedes Class A
Mercedes Classe A (2012-2018 / W176) .. the rear taillight and its bulbs of the Mercedes Classe A. First, we open the rear trunk door and start unscrewing the plastic screw that we find behind.. …
Replacing the Key Battery for the Mercedes A-Class - B-Class
Replacing the Key Battery for the Mercedes A-Class - B-Class
Mercedes Classe A (2004-2012 / W169) .. the battery in the remote key for the Mercedes A-Class, as well as the B-Class. First, take your remote in hand and start by removing the physical key.. …
Replacing the Low Beam Bulb on the Mercedes 180 Class A
Replacing the Low Beam Bulb on the Mercedes 180 Class A
Mercedes Classe A (2018-2026 / W177) .. to replace the low beam bulb on the Mercedes 180 Class A. This is a very simple task that can be done without going to a mechanic and takes little time... …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos