Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Light Bulbs on Mercedes A-Class

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Tail light bulb

Let's replace the bulbs in the rear light on the Mercedes A-Class. Lift the rear hatch, and remove the cover on the side of the cargo area. Use a socket wrench to remove the securing nuts of the rear light, and use a plastic lever to help remove the rear light assembly. Replace the damaged bulbs with new ones (same size and voltage). After replacing the damaged bulbs, prepare to reassemble the bulb holder inside the rear light assembly. Tighten the securing screws and close the inspection cover located in the trunk.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light and bulbs of the Mercedes Class A
How to replace the rear light and bulbs of the Mercedes Class A
Mercedes Classe A (2012-2018 / W176) .. the rear taillight and its bulbs of the Mercedes Classe A. First, we open the rear trunk door and start unscrewing the plastic screw that we find behind.. …
How to Replace the Rear Headlight Bulbs on a Mercedes A-Class
How to Replace the Rear Headlight Bulbs on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) Are your rear headlight bulbs burnt out? Let's see how to change them. Open the trunk, then remove the fabric cover located on the side trim of the t…
Replacing Headlight Bulbs on A-Class
Replacing Headlight Bulbs on A-Class
Mercedes Classe A (1997-2004 / W168) .. replace the rear headlight bulbs on a Mercedes A-Class. Open and lift the trunk to access the interior of the cargo area trim. Remove the cover on the.. …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos