Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulbs on A-Class

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Tail light bulb

Let's replace the rear headlight bulbs on a Mercedes A-Class. Open and lift the trunk to access the interior of the cargo area trim. Remove the cover on the side of the cargo area, unscrew the retaining screws behind the rear headlight, and remove it. Disconnect the bulb holder from the headlight, replace the damaged bulbs with new ones (same voltage and size as the original). Install the headlight back into the body and screw in the retaining screws. Turn on the headlights and check the operation of the new bulbs installed inside.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Low Beam Headlight Bulbs on the New Mercedes A-Class 180 Sport
How to Replace the Low Beam Headlight Bulbs on the New Mercedes A-Class 180 Sport
Mercedes Classe A (2012-2018 / W176) .. low beam headlight bulbs on the new Mercedes A-Class 180 Sport. On this vehicle, access to the front headlight bulbs is located inside the front fenders... …
Removing Headlight Bulbs on Mercedes A-Class
Removing Headlight Bulbs on Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. burnt-out front headlight bulbs on a Mercedes A-Class? Here's how to remove and replace them. Open the hood by pulling the lever located at the bottom.. …
How to replace the headlight bulbs of the Mercedes A-Class
How to replace the headlight bulbs of the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. to replace the headlights bulbs of the Mercedes Class A model W 168. To replace the left headlight bulb, we need to disconnect the expansion tank; we.. …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos