Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the headlight bulbs of the Mercedes A-Class

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Headlight bulb

Today we will explain how to replace the headlights bulbs of the Mercedes Class A model W 168. To replace the left headlight bulb, we need to disconnect the expansion tank; we lift the yellow locking lever to move and raise the expansion tank. To replace the high beam bulbs, we need to remove the cover on the grille side and grasp the connector to disconnect it. To remove the bulb, we must detach the metal lever and pull it outward. We insert the bulb into the headlight and lift the metal lever, connect the connector, and close the grille cover. To replace the position light bulb, we need to remove the connector, take out the bulb, and insert the new one, which will work once connected to the connector. To replace the low beam bulb, we need to remove the cover from the body side. We disconnect the electrical connector of the bulb by pulling the black part and being careful not to pull the wires. We rotate the tab and pull out the bulb. We insert the bulbs by rotating them inward and locking the tab, connect the connector, and close the cover. We proceed in the same way to replace the right front headlight bulbs.

Posted on 19 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2012-2018 / W176) .. low beam headlight bulbs on the new Mercedes A-Class 180 Sport. On this vehicle, access to the front headlight bulbs is located inside the front fenders... …
Mercedes Classe A (1997-2004 / W168) .. burnt-out front headlight bulbs on a Mercedes A-Class? Here's how to remove and replace them. Open the hood by pulling the lever located at the bottom.. …
Mercedes Classe A (2012-2018 / W176) .. in the front headlights of a 2014 Mercedes A-Class. The replacement parts used for this maintenance task are: - ZES 2 LED low beam bulbs with active.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos