Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Bulb on Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Follow these steps to remove and install the headlight bulbs on a Mercedes C-Class. Open the hood by pulling the lever located at the bottom right of the dashboard (if available) and secure it with the prop rod. Locate the headlight inspection cap (located at the rear of the headlight) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holder out of the headlight and extract the damaged bulb using a screwdriver and pliers.

Install the new LED bulb (ensuring it is the correct type and size) and insert the bulb holder back into the headlight housing, then close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Install LED Bulbs on the Mercedes C-Class - B-Class
How to Install LED Bulbs on the Mercedes C-Class - B-Class
Mercedes Classe C (2007-2013 / W204) .. replace the headlight bulbs on the Mercedes C-Class and B-Class, as well as the GLA. First, open the hood and start by removing the plastic cover protecting.. …
How to Replace the Headlight Bulb on a Mercedes C-Class
How to Replace the Headlight Bulb on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. you begin, open the hood of your Mercedes C-Class. Start by unscrewing and removing the rear cover of the bulb. Next, disconnect the electrical connector,.. …
How to Remove the Dome Light in a Mercedes C-Class
How to Remove the Dome Light in a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. bulb or LED in the dome light of a Mercedes C-Class. Using a screwdriver or plastic trim tool, pry between the dome light cover and its perimeter (without.. …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos