Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Mercedes Vito

Model: Mercedes Vito W639, MK 2 - Years 2003-2013
Part: Tail light bulb

Today we will discover the process of how to disassemble and replace the bulbs of the rear headlight of the Mercedes Vito. First, we open the rear doors and start unscrewing the two fixing screws of the headlight that we find on the sides, then disconnect the electrical connector to remove it; now we separate the bulb holder from the light fixture, thus accessing all the stop light bulbs, as shown in the video. Now we replace any faulty bulbs with new ones, of the correct type and with the same connection; we reassemble the light fixture and finally the rear headlight!

Posted on 15 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the airbag of the Mercedes Vito W639
How to replace the airbag of the Mercedes Vito W639
Mercedes Vito (2003-2013 / W639, MK 2) In this video we can see how to replace the airbag module of the Mercedes Vito: to remove it from its housing we need to insert two small screwdriver…
How to replace the front headlight bulb of the Mercedes Vito
How to replace the front headlight bulb of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) In this short and simple guide, we will see how to disassemble and replace the low beam bulb of the front headlight of the Mercedes Vito. First of al…
How to lower the spare wheel of the Mercedes Vito
How to lower the spare wheel of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) The instructions in this guide will show us how to lower the spare wheel, replacing it in case of a flat tire, of the Mercedes Vito. First, we open t…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos