Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tail light bulb

See other generations:
Video tutorial

Today we will explain how to replace the rear headlight bulb of the Mercedes Vito. We start the replacement by opening the trunk and then unscrewing the side screws using lubricant and a socket wrench with a 25mm insert. We remove the headlight from its housing and disassemble the light fixture.

We remove the faulty bulbs and insert the new ones, being careful not to touch the glass part to prevent the bulbs from failing prematurely. We install the bulbs and close the light fixture cap. We place the headlight back into its housing and screw in the locking screws.

After closing the trunk, we test the bulbs by turning on the lights.


Posted on 21 October 2025 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Mercedes Vito
How to replace the rear headlight bulb of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) Today we will explain how to replace the rear headlight bulb of a Mercedes Vito vehicle in an easy, fast, but above all autonomous way. To replace th…
How to Remove the Bulb from the Rear Light of a Mercedes Vito
How to Remove the Bulb from the Rear Light of a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before you can start, open the rear door of your Mercedes Vito. Begin by unscrewing and removing the screws that secure the rear light to its housing…
How to Change the Front Headlight Bulb in the Mercedes Vito?
How to Change the Front Headlight Bulb in the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) In the Mercedes Vito, you can change the front headlight bulb without needing to remove the entire unit. What you need to remove is only the wheel ar…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos