Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the suspensions of the Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Suspension system

See other generations:
Video tutorial

To reset the suspensions of the Mercedes E-Class, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port will be located on the dashboard immediately below the steering column. Once the connection is made, you can select the car model and corresponding version: after the connection, you can proceed by following the instructions shown on the screen that are necessary to restore the operation of the suspensions.

Then you can disconnect the scanner to verify that everything is working.


Posted on 17 February 2025 by ScegliAuto


Related tutorials

Where is the air suspension relay located in the Mercedes E-Class?
Where is the air suspension relay located in the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. hydraulic suspension system of your Mercedes E-Class has suddenly stopped working, first check the status of the respective relay, the location of which.. …
Where are the fuses located in the Mercedes E-Class?
Where are the fuses located in the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. Any fuse box of the Mercedes E-Class is responsible for containing the fuses that regulate the operation of the devices on the vehicle:.. …
What Does the B Service of a Mercedes Include
What Does the B Service of a Mercedes Include
Mercedes Classe E (2009-2016 / W212) .. of a Mercedes includes (we'll look at an E-Class in the video). This is an official Mercedes service performed every two years or 12,000 miles,.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos