Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seat of a Mercedes E-Class W212

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Rear bench seat

From this video, we can understand how to remove the rear seat of a Mercedes car that has a child seat installed: the seat belt of this seat was stuck, and only after removing it was it possible to discover that the blockage was caused by a small pebble that had become lodged inside. With the child seat still attached, we remove the plastic cover by pulling it upwards; we remove the two bolts that we find below, repeating the operation on the other side of the seat. Now we can remove it from its position and replace the seat belt, removing the bolt and disconnecting the two connectors.

Posted on 24 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seat Bench of a Mercedes E-Class
How to Remove the Rear Seat Bench of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) Before you can start, open the rear doors of your Mercedes E-Class. Begin by prying off and removing the rear cup holder cover, then detach it by uns…
How to remove the rear seat of the Mercedes E-Class W212
How to remove the rear seat of the Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. the entire rear seat of your Mercedes E-Class W212 by yourself, you must first carefully read the following guide and then follow the various.. …
How to Remove the Rear Seat Bench on a Mercedes E-Class W212
How to Remove the Rear Seat Bench on a Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. Removing the rear seat bench of a Mercedes E-Class W212 is simple: pulling the seat cushion is easy, just slide it out. To remove the backrest, go.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos