Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove the wiper blades of the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Windscreen wipers
Operation: How to remove the wiper blades of the Mercedes C-Class

To replace the front wiper blades of the Mercedes C-Class, we proceed, first of all, to raise the arm to which the blade itself is hinged and which allows it to move to clean the windshield. Raised the arm, we can extract the brush from its pin (simply by rotating the brush itself in a particular position as shown in the images) which connects it to it. We take the new brush and proceed to replace it by carrying out the same operations but performing them backwards. We carry out the same operations seen for replacing the other brush and that's it.


Posted on 22 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What to do when the windshield wiper of the Mercedes C-Class is not working? Read Answer
    • Classe C 2014-2021 - What is the windshield fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos