Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of a Mercedes E-Class?

Model: Mercedes Classe E W213 - Years 2016-2023
Part: Battery

To replace the battery of a Mercedes E-Class, start by opening the trunk, as the battery is usually located in the rear compartment. Once the trunk is open, lift the bottom cover panel to access the compartment where the battery is housed. Before starting the replacement, make sure to turn off the vehicle and remove the key to avoid any electrical risks. Loosen the negative battery cable first using a wrench, then proceed with the positive cable. Once the cables are disconnected, remove the securing bracket holding the battery in place. At this point, you can lift the battery out of the compartment. Be careful, as the battery can be quite heavy. Take the new battery and insert it into the same housing, making sure it is properly positioned. Secure the safety bracket again to keep the battery stable during driving. Reconnect the positive cable first and then the negative one, making sure they are tightly secured. Finally, put the trunk cover panel back in place. After completing the replacement, start the vehicle to verify that everything is working correctly and there are no power issues.

Posted on 16 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (2016-2023 / W213) .. order to replace the battery of the Mercedes E-Class, it is necessary to open the hood so that you can access the components located inside the engine.. …
Mercedes Classe E (2016-2023 / W213) .. perform the battery replacement in a Mercedes E-Class, first, open the hood. The battery is located in the upper left area. After removing the plastic.. …
Mercedes Classe E (2009-2016 / W212) .. On the Mercedes E-Class, in order to replace the battery, you need to open the hood so that you can access the components.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe E 2016-2023 - Where is the auxiliary battery of the Mercedes Benz E-Class W213 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos