Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the console and center tunnel of the Mercedes CLK.

Model: Mercedes Clk A209, C209, W209 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Center console tunnel

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and eventually replace the center tunnel and its components of the Mercedes CLK. First of all, we get on board the car and start disassembling and removing the plastic cover of the gear shift boot; disconnect the electrical connector found underneath, as shown in the video.

At this point, we open the armrest and unscrew the fixing screws inside, removing the additional screws of the center tunnel; we gently remove all the plastics, applying the reverse process for reassembly!


Posted on 16 June 2025 by ScegliAuto


Related tutorials

Removing the Rear Air Vents on the Mercedes CLK
Removing the Rear Air Vents on the Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) In this video tutorial, you will learn how to remove and replace the rear air vents of the centre tunnel on the Mercedes CLK by following these simpl…
How to Open the Roof of a Mercedes CLK?
How to Open the Roof of a Mercedes CLK?
Mercedes Clk (1997-2003 / A208, C208, W208) To open the roof of the Mercedes CLK, first open the boot to access the components inside. Here you will find the base of the roof, which must fit pe…
Removing the Radio from a Mercedes CLK
Removing the Radio from a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) How to remove and replace the radio in a Mercedes CLK? Let's see how to do it. Remove the ashtray using a plastic lever (located under the radio), de…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos