Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Air Vents on the Mercedes CLK

Model: Mercedes Clk W209, A209, C209 - Years 2002-2010
Part: Air vents

In this video tutorial, you will learn how to remove and replace the rear air vents of the centre tunnel on the Mercedes CLK by following these simple steps. First, access the rear of the vehicle and begin removing the centre tunnel to access its underside; then use two thin levers (or two flathead screwdrivers) to release the two tabs of the air vent cover, as shown in the video. Now, replace the air vents with the new ones, installing them correctly!

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Mercedes CLK
How to Replace the Air Filter on a Mercedes CLK
Mercedes Clk (1997-2003 / A208, W208, C208) How to replace the air filter on a Mercedes CLK? Let's see how to carry out the removal of the part. Open the car door, pull up the engine compartmen…
Replacing the Engine Air Filter on a Mercedes CLK
Replacing the Engine Air Filter on a Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) In today's tutorial, you will learn how to remove and replace the engine air filter on a Mercedes CLK. First, obtain the new air filter and open the …
Removing the External Door Handle on a Mercedes CLK
Removing the External Door Handle on a Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) Let’s look at removing the external handle of a Mercedes CLK. Open the door and locate the seal that needs to be removed to access the screws securin…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos