Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : How to activate the fog lights in Mercedes CLK Class?

Mercedes Clk - Video tutorial

Model: Mercedes Clk W209 - Years 2002-2010
Part: Fog lights
Operation: How to activate the fog lights in Mercedes CLK Class?

In this tutorial we can see how to activate the fog lights in your Mercedes CLK, an extremely simple operation but probably not very intuitive. First of all, insert the key and turn on the instrument panel, then locate the external light switch located on the left side of the dashboard. We then turn the selector clockwise by turning on at least the sidelights, indicated by the penultimate icon, then grab the knob and pull it towards us. A first click will turn on the front fog lights, while the second click will turn on the rear fog lights.


Posted on 19 April 2023 by ScegliAuto



Where are the fuses located in the Mercedes CLK?
Mercedes Clk (1997-2003 / W208) The fuses of the Mercedes CLK are divided inside the appropriate fuse boxes that are installed on the vehicle: in this type of car, it is possible to
How to remove the glove box of a Mercedes C-Class CLK A209
Mercedes Clk (2002-2010 / W209) Before we can start, we will have to go to open the front passenger door of our Mercedes C-Class CLK A209. So let's start by opening the glove compar
Where are the fuses located in the Mercedes CLK?
Mercedes Clk (2002-2010 / W209) Every fuse of the Mercedes CLK is located inside one of the special fuse boxes that are installed on the vehicle: on this type of car, three boxes ca

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos