Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulbs in the Mercedes CLK?

Model: Mercedes Clk A209, C209, W209 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fog lights

See other generations:
Video tutorial

In this tutorial, you will see how to replace the fog light bulbs in the Mercedes CLK, a very simple and quick operation. Ensure the key is not inserted for safety, then position yourself in front of the wheel on the side you will be working on, locate the inner panel, and remove it by unscrewing the relevant fixing bolts.

Next, disconnect the power connector, slightly rotate the bulb holder counterclockwise, and extract it from the housing. Once the replacement bulb is inserted, simply follow the reverse procedure.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Activate the Fog Lights in a Mercedes CLK?
How to Activate the Fog Lights in a Mercedes CLK?
Mercedes Clk (2002-2010 / A209, C209, W209) In this tutorial, you will see how to activate the fog lights in a Mercedes CLK, an extremely simple operation but probably not very intuitive. First…
How to Replace the Interior Dome Light Bulb of the Mercedes CLK
How to Replace the Interior Dome Light Bulb of the Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) In this guide, we will discover the instructions that will allow you to remove and replace the bulbs of the interior dome light of the Mercedes CLK. …
How to Change the Rear Headlamp on Mercedes CLK
How to Change the Rear Headlamp on Mercedes CLK
Mercedes Clk (1997-2003 / A208, C208, W208) Do you want to replace the rear headlamp on the Mercedes CLK? Remove the rear headlamp from inside the boot of the Mercedes. Lift the boot lid, then …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos