Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light Bulb

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Light bulb

See other generations:
Video tutorial

To replace the front fog light bulb (H1 fitting), you must lift the vehicle to remove the front wheel and then the wheel arch liner to easily access the fog light housing: be careful when removing the plastic retaining clips (it is advisable to spray some penetrating oil); once you reach the fog light housing, remove the cap by pressing on the two retaining tabs and disconnect the bulb retaining spring to extract it from its housing, then reverse the process to install the new one.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Light Bulbs on Mercedes E-Class
Replacing Rear Light Bulbs on Mercedes E-Class
Mercedes Clk (1997-2003 / A208, C208, W208) Are the rear light bulbs damaged? Let's see how to change them. Open and lift the tailgate, remove the covering cloth (located on the right or left s…
Replacing the Brake Light Bulb
Replacing the Brake Light Bulb
Mercedes Clk (1997-2003 / A208, C208, W208) You can change the brake light bulb yourself without needing to go to a garage. The brake light bulbs are among the most important in a car as they s…
Replacing the Front Indicator Bulb
Replacing the Front Indicator Bulb
Mercedes Clk (1997-2003 / A208, C208, W208) The front indicator bulb is integrated within the headlamp and replacing it is fairly simple, but it is necessary to remove the air filter housing fo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos