Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Light Bulb

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

You can change the brake light bulb yourself without needing to go to a garage. The brake light bulbs are among the most important in a car as they signal to those behind that you are slowing down or braking.

By checking your car's manual, you can determine which bulbs need to be fitted to your vehicle. Once you have removed the rear lamp, you can access the bulb directly.

Next, open the boot to expose the fixing screws of the lamp and begin unscrewing them. Once the lamp is removed, it will be easy to access the bulb that needs to be changed.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Light Bulbs on Mercedes E-Class
Replacing Rear Light Bulbs on Mercedes E-Class
Mercedes Clk (1997-2003 / A208, C208, W208) Are the rear light bulbs damaged? Let's see how to change them. Open and lift the tailgate, remove the covering cloth (located on the right or left s…
How to replace the engine fan fuse on a 2000 Mercedes CLK
How to replace the engine fan fuse on a 2000 Mercedes CLK
Mercedes Clk (1997-2003 / A208, C208, W208) When the engine fan stops working, it is necessary to replace the relevant fuse. The fuse in question is located inside the fuse box under the bonnet…
Replacing the Crankshaft Position Sensor
Replacing the Crankshaft Position Sensor
Mercedes Clk (1997-2003 / A208, C208, W208) One of the first symptoms of a malfunctioning crankshaft position sensor is the failure to start the engine, especially when hot: the sensor (which i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos