Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Headlight Bulb

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Light bulb

The new generation of LED bulbs has surpassed old xenon kits and has become economically accessible and easy to install since there is no need to install ignition control units; simply remove the old bulb and install the new LED one: the front of the vehicle will take on a more modern appearance, significantly improving road illumination and avoiding the annoying glare from old xenon kits; to install the bulb on the passenger side, remove the engine air filter box to access the bulb holder, remove the cap, and replace the bulb.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb with LED Model
Replacing the Front Headlamp Bulb with LED Model
Mercedes Clk (1997-2003 / A208, W208, C208) When deciding to replace the original bulbs with LED types, the warning light for the lighting system may illuminate on the dashboard: this occurs be…
How to Replace the Front Headlight Bulb on the Mercedes CLK
How to Replace the Front Headlight Bulb on the Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) Replacing the front headlight bulb on a 2007 Mercedes CLK is a very simple task that you can perform independently. Start the procedure by opening th…
Replacing the Front Headlight Bulb
Replacing the Front Headlight Bulb
Mercedes Clk (1997-2003 / A208, W208, C208) Once the bonnet is open, there is enough space behind the headlights to proceed with replacing the bulbs; start by removing the protective cap of the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos