Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Mount Replacement Instructions

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Engine

To replace the engine mount, lift the vehicle on appropriate car stands and then apply a jack directly under the engine (possibly also under the oil sump) to support it during the removal of the mount; access the engine bay and locate the fixing pin of the mount to remove it and extract it from its seat: for this manoeuvre, it may be easier to remove the auxiliary belt for more working space; then insert the new mount, secure it with the relevant pin, and refit the auxiliary belt.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing Spark Plugs
Instructions for Replacing Spark Plugs
Mercedes Clk (1997-2003 / A208, W208, C208) To replace the spark plugs, it is advisable to proceed with a cold engine to avoid unpleasant burns; note that to access the bank on the passenger si…
How to replace the lock cylinder of the Mercedes CLK
How to replace the lock cylinder of the Mercedes CLK
Mercedes Clk (1997-2003 / A208, W208, C208) In this short guide, we will see the main steps on how to disassemble and replace the lock cylinder of the Mercedes CLK. First, we open the front doo…
Guide to disassembling the console and center tunnel of the Mercedes CLK.
Guide to disassembling the console and center tunnel of the Mercedes CLK.
Mercedes Clk (2002-2010 / W209, A209, C209) In this guide we will see the instructions that will allow us to disassemble and eventually replace the center tunnel and its components of the Merce…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos