Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Inserting Lumbar Support in Driver's Seat

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Accessory kit

See other generations:
Video tutorial

If you want to make the driver's seat more comfortable, you can insert a lumbar support into the backrest to provide additional support in this area: many cars are already equipped with this device that can be "inflated" or "deflated" as needed. In any case, to insert this additional support, simply remove the plastic cover located behind the seat back by unscrewing the two fixing screws at the bottom, unclip the fastening tabs of the protective fabric, and insert a piece of foam inside the upholstery; then reverse the process to reassemble the seat.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Mercedes CLK
How to Reset the "Service" Light on a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Before you begin, sit in the driver's seat of your Mercedes CLK. Start by activating the instrument cluster. Next, select the "Service" option using …
How to Reset the "Service" Light on a Mercedes CLK
How to Reset the "Service" Light on a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Before you start, sit in the driver's seat of your Mercedes CLK. Begin by activating the instrument cluster by turning the key in the ignition. Next,…
How to Open the Mercedes CLK Roof?
How to Open the Mercedes CLK Roof?
Mercedes Clk (1997-2003 / A208, C208, W208) Open the Mercedes CLK roof by following the manual procedure: use a tool to lift the lower rear part of the roof. Once lifted, open the boot by lever…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos