Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlight Bulb on a Mercedes CLK

Model: Mercedes Clk A209, C209, W209 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

Change the damaged bulb in the front headlight? Here’s how to remove it from a Mercedes CLK. Open and lift the front bonnet by pulling the lever located at the bottom right of the dashboard, secure it with the prop rod. Remove the cover cap from the front headlight (as shown in the video).

Once the cap is removed, take out the bulb holder with the metal clips and the bulb.

Fit the new bulb inside the front headlight, cover the access hole with the plastic cap. Finally, test the correct operation of the lights (turn on the ignition and switch on the headlights).


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb of a Mercedes CLK?
How to Replace the Front Headlamp Bulb of a Mercedes CLK?
Mercedes Clk (2002-2010 / A209, C209, W209) To replace the front headlamp bulb of the Mercedes CLK, open the bonnet to access the internal part of the corresponding headlamp. Detach the circula…
How to Replace the Front Headlight Bulb on the Mercedes CLK
How to Replace the Front Headlight Bulb on the Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Replacing the front headlight bulb on a 2007 Mercedes CLK is a very simple task that you can perform independently. Start the procedure by opening th…
Removing the Front Seat of the Mercedes CLK
Removing the Front Seat of the Mercedes CLK
Mercedes Clk (1997-2003 / A208, C208, W208) This short guide provides instructions to remove and replace the front seat of the Mercedes CLK in simple steps. First, open the front door of the ve…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos