Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the ABS Control Unit

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Control unit

See other generations:
Video tutorial

If the ABS warning light remains illuminated on the instrument panel, which is the system that allows the wheels to brake without locking and thus skidding, it is likely that there is a fault with the control unit; to remove it, open the bonnet and locate the position of this unit, which is just behind the left front headlamp (driver's side), in front of the windscreen washer reservoir; then unscrew the mounting screws of the unit (which also integrates the solenoids for the pistons) and pull it away from its position to disconnect the respective connectors.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the ABS Sensor
Instructions for Removing the ABS Sensor
Mercedes Clk (1997-2003 / A208, C208, W208) To comfortably carry out this maintenance, it is suggested to remove the front wheel: next to the brake pipe is the speed sensor cable for the ABS, w…
ABS Pump Replacement Instructions
ABS Pump Replacement Instructions
Mercedes Clk (1997-2003 / A208, C208, W208) The anti-lock braking system, commonly known as ABS (from English Antilock Braking System or German Antiblockiersystem), is a safety system that prev…
Instructions for Replacing Spark Plugs
Instructions for Replacing Spark Plugs
Mercedes Clk (1997-2003 / A208, C208, W208) To replace the spark plugs, it is advisable to proceed with a cold engine to avoid unpleasant burns; note that to access the bank on the passenger si…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos