Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Indicator Bulb

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Side marker bulb

See other generations:
Video tutorial

The front indicator bulb is integrated within the headlamp and replacing it is fairly simple, but it is necessary to remove the air filter housing for better access; once you reach the back of the headlamp, the indicator is located at the top, disconnect the power connector and rotate the bulb holder anti-clockwise to extract it from the headlamp; proceed to replace the bulb (bayonet fitting) with an orange one; reposition the bulb holder in its housing and connect the power, checking for functionality.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Indicator Bulb
Replacement of Front Indicator Bulb
Mercedes Clk (1997-2003 / A208, C208, W208) The side indicator is integrated into the bumper trim: to access the bulb, disconnect the indicator itself. Use a plastic lever to push the indicator…
Replacing the Spiral Contact / Steering Angle Sensor of the Mercedes CLK W209
Replacing the Spiral Contact / Steering Angle Sensor of the Mercedes CLK W209
Mercedes Clk (2002-2010 / A209, C209, W209) In this video tutorial, you will learn how to dismantle and replace the spiral contact or steering angle sensor of the Mercedes CLK W209, second seri…
Replacement of Front Shock Absorber
Replacement of Front Shock Absorber
Mercedes Clk (1997-2003 / A208, C208, W208) Replacing the shock absorber on this vehicle is very straightforward as the damper is not integrated into the spring but installed alongside it: ther…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos