Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : How to remove the instrument cluster on Mercedes Classe Clk

Mercedes Clk - Video tutorial

Model: Mercedes Clk W209 - Years 2002-2010
Part: Instrument cluster
Operation: How to remove the instrument cluster on Mercedes Classe Clk

How to remove the instrument cluster on Mercedes Clk Class? Let's see how to disassemble the pieces: unscrew the screws placed in the plastic parts of the steering wheel cover with a screwdriver and remove the frame from the instrument panel (if present). Unscrew the clamping screws of the instrument panel with a screwdriver; after removing the screws, remove the piece from the dashboard and disconnect the power cable located in the back of the instrument panel. We assemble a new piece or (we replace the leds / bulbs from the panel) we reassemble the same. Finally we proceed backwards in the assembly operations.


Posted on 16 November 2023 by ScegliAuto



How to set the time on Mercedes CLK w209
Mercedes Clk (2002-2010 / W209) To set the time on a Mercedes CLK w209, the steps are as follows. Turn on the instrument cluster of your Mercedes. Press the MENU button on the steer
How to remove the instrument cluster of a Mercedes CLK
Mercedes Clk (2002-2010 / W209) Before we can start, we will have to go and sit in the driver's seat of our Mercedes CLK. Using a small slotted screwdriver, we will have to start by
Disassembly of the instrument panel on Mercedes Clk
Mercedes Clk (2002-2010 / W209) Do we want to remove the instrument panel of a Mercedes Clk? Let's see how the piece is removed from inside the Mercedes dashboard. We use hook lever

Other guides that may interest you

    Frequently Asked Questions

    • Clk 2002-2010 - What does the serv light on the Mercedes CLK W209 indicate? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos