Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the instrument cluster from a Mercedes CLK

Model: Mercedes Clk A209, C209, W209 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Instrument cluster

See other generations:
Video tutorial

Before you can start, sit in the driver's seat of your Mercedes CLK. Using a small flathead screwdriver, begin by releasing the two clips that secure the instrument cluster. To release these clips, simply insert the tip of the screwdriver into the two front holes of the instrument panel.

Once you have released the two clips, proceed to extract the instrument cluster from its housing. At this point, to complete the removal, simply disconnect the rear plugs, and you will have finished disassembly.

To install the new instrument cluster, just follow these steps in reverse, and you will have successfully completed the replacement.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster on a Mercedes CLK Class
How to Remove the Instrument Cluster on a Mercedes CLK Class
Mercedes Clk (2002-2010 / A209, C209, W209) How to remove the instrument cluster on a Mercedes CLK Class? Let's see how to carry out the disassembly of the parts: unscrew the screws located in …
How to Remove the Instrument Cluster of the Mercedes CLK
How to Remove the Instrument Cluster of the Mercedes CLK
Mercedes Clk (1997-2003 / A208, C208, W208) Today, we will discover how to remove and replace the instrument cluster of the Mercedes CLK dashboard. First, get into the vehicle and start by remo…
How to reset the maintenance (service) light on the Mercedes CLK.
How to reset the maintenance (service) light on the Mercedes CLK.
Mercedes Clk (2002-2010 / A209, C209, W209) In short, we will see the procedure to reset the regular maintenance warning (service) of the Mercedes CLK. First, we get inside the vehicle and turn…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos