Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Mercedes C-Class?

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

From the instrument panel of the Mercedes C-Class, it will be possible to completely remove the Service light by turning the key to activate the instrument panel and then holding down the OK and phone answer buttons on the steering wheel spokes. By holding down these buttons, a menu will open in which you can navigate with the steering wheel controls, selecting "ASSYST PLUS": then you will need to select "Full service" and "Conf. Full service". When the confirmation message appears, you will need to select "Yes", and then turn off the instrument panel to complete the procedure.


Posted on 11 July 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. reset the service light on the Mercedes-Benz C-Class in simple steps. First, get in the vehicle and turn on the instrument cluster; then press and hold.. …
Mercedes Classe C (2014-2021 / W205) .. reset the service light on your Mercedes-Benz C-Class W205 is practically identical to that used in all recent Mercedes models. Below are the steps you.. …
Mercedes Classe C (2014-2021 / W205) .. regular maintenance oil change on a Mercedes C-Class. First, get in the vehicle and turn on the ignition; then go to the onboard computer menu and select.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos