|
Do it yourself
| |||
| ||||
How to reset the service indicator on a 2011 Mercedes C200
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In this video, we see how to reset the service light on a 2011 Mercedes C200: turn on the ignition and press the menu button until the mileage appears, then scroll to "trip" and press the phone button within 5 seconds, then immediately press "ok". Hold down these two buttons until a menu appears with "assyst plus" among other options, which we will select. In the submenu, select "full service". The display will list the services to be performed, scroll through the list until "confirm service" is selected and confirm with "ok". Confirm the type of oil used, then "service carried out" will be highlighted: confirm "yes". The display will respond with "no take back", confirm and use the up arrow to return to the mileage. Turn off the ignition, Service reset.
Posted on 13 July 2025 by ScegliAuto
Related tutorials
Mercedes Classe C
(2014-2021 /
W205)
In this article, you will learn how to reset the service light on a 2019 Mercedes C200. It is recommended to perform this operation only after having…
Mercedes Classe C
(2000-2007 /
W203)
To reset the service light on the Mercedes C200 W203, start by turning on the ignition without starting the engine. Press the button to the left of t…
Mercedes Classe C
(2000-2007 /
W203)
To reset the service light on the Mercedes C200, start by turning on the instrument cluster without starting the engine. Press the button to the left…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |