Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a 2019 Mercedes C200

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

In this article, you will learn how to reset the service light on a 2019 Mercedes C200. It is recommended to perform this operation only after having the vehicle serviced. To reset the light, first start the instrument cluster.

After starting it, press and hold the back arrow button for 7 seconds. While holding the button, press the confirm button.

At this point, the menu will open. From the menu that appears, select the ASSYST PLUS option, then confirm it. Next, select the complete maintenance option, confirm the maintenance, and select the type of engine oil used.

Then confirm the reset and wait for the reset to complete. Once the reset is complete, it is advisable to restart the instrument cluster to verify that the procedure was successful.


Posted on 10 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) In this video, we see how to reset the service light on a 2011 Mercedes C200: turn on the ignition and press the menu button until the mileage appear…
Mercedes Classe C (2007-2013 / W204) The fuse boxes play a crucial role in the vehicle, as they protect connected devices from overloads, such as the radio, cigarette lighter, and more. …
Mercedes Classe C (2000-2007 / W203) To reset the service light on the Mercedes C200 W203, start by turning on the ignition without starting the engine. Press the button to the left of t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos