Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Mercedes-Benz C-Class

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil on a Mercedes-Benz C-Class, start the engine for a few minutes to thin the oil, then turn off the vehicle and safely lift it. Place a container under the oil pan and unscrew the drain plug to completely empty the system of the old lubricant.

Once the draining is complete, remove the oil filter using the appropriate tool.

Before installing the new filter, apply a light coat of oil on the gasket to ensure a good seal. Then install the new filter and close the oil pan plug.

Lower the vehicle and add the new oil through the upper engine cap in the correct amount. Finally, start the engine for a few seconds, check for leaks, and verify the level with the dipstick, adding oil if necessary.


Posted on 19 May 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil on a Mercedes C-Class
How to Change Engine Oil on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. How to change the oil and filter on a Mercedes C-Class? Let's see how to proceed in this video. Lift the hood and secure it. Use a socket wrench to unscrew.. …
How to Change Engine Oil and Filter on a Mercedes C-Class
How to Change Engine Oil and Filter on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. oil and the corresponding filter on a Mercedes C-Class. Lift the car using a column lift or jack and remove the bolt located under the oil pan with a.. …
Oil Change on Mercedes C-Class
Oil Change on Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. In this video, you will see how to change the engine oil on a Mercedes Benz C 220 CDI. Raise the hood and first remove the plastic.. …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos