Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to change the engine oil and filter on a Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Oil filter
Operation: How to change the engine oil and filter on a Mercedes C-Class

Let's see in this video how to change the engine oil with its special filter on a Mercedes C-Class. We lift our car on a column or jack bridge and unscrew the pin placed under the oil pan with a socket wrench. doing so the oil will flow down into a container for future disposal. After having drained all the oil well, let's screw the pin back into the sump, moving on to the oil filter. We locate the oil filter cover, unscrew the large black filter cover, take out the old filter and insert the new one. We check that the cap has adhered well to the base. Finally, top up the oil pan with the new liquid following the manufacturer's recommendations.


Posted on 1 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2014-2021 - Which key to use for the oil filter on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos