Do it yourself
Frequently asked questions about cars and motorcycles

One way to solve the malfunction of the active hood of a Mercedes A-Class

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this video we see a problem that often occurs on Mercedes cars: the malfunction of the "active hood" system, which is the pedestrian protection system that slightly raises the hood in case of impact, to cushion the blow with the pedestrian. The video shows us that the airbag control unit records two "open circuit" error codes for both the right and left lifting actuators.

The mechanic then disconnects the actuators and connects a jumper directly to the wiring connectors that go to the control unit. If the control unit now reads 0 Ohms (short circuit), it means that the wiring is intact and the SRS control unit is functioning properly.

The actuators are expensive to replace, and the solution shown is a bypass, but this intervention deactivates the pedestrian protection system, so in case of an accident, the hood will not lift to protect the pedestrian. The ethical and correct solution is to replace the faulty actuators with original ones to restore the full functionality of the safety system.


Posted on 26 August 2025 by ScegliAuto


Related tutorials

Mercedes Classe A (2004-2012 / W169) .. The starter motor of the Mercedes A-Class is located under the air filter box, which is why in case of malfunction we need to remove the.. …
Mercedes Classe A (2004-2012 / W169) .. tire pressure warning light on our Mercedes A-Class w169? It's best to stop the car and check what's going on, such as low tire pressure or a puncture... …
Mercedes Classe A (2004-2012 / W169) Periodically, all those who own a car open the hood to check the levels of engine oil, radiator fluid, windshield washer fluid, and so on, as well as…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 2012-2018 - Why does the instrument cluster not turn on in the Mercedes A-Class? Read answer
    • Classe A 2012-2018 - Where is the exterior temperature sensor of the Mercedes A-Class located? Read answer
    • Classe A 2018-2026 - Where is the Mercedes A-Class jack located? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos