Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Mercedes GLK

Model: Mercedes Glk MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

Video tutorial

Let's briefly see the instructions that will allow us to disassemble and replace the headlight bulb of the Mercedes GLK. First of all, we open the car's engine hood and start by removing the plastic protective cap that we find behind the headlight; then we disconnect the electrical connector of the bulb to remove the light, as shown in the video.

At this point, we replace the low beam bulb with the new one, of the correct type and with the same connection; we connect it and verify its operation, finally fixing the plastic cap.


Posted on 1 September 2025 by ScegliAuto


Related tutorials

How to Replace Front Bulbs on a Mercedes GLK
How to Replace Front Bulbs on a Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) Replace the bulbs inside the front headlight of the Mercedes GLK. Release the front bonnet by pulling the lever located at the bottom right of the da…
How to remove the front headlight from the Mercedes GLK?
How to remove the front headlight from the Mercedes GLK?
Mercedes Glk (2008-2015 / MK 1) To remove the front headlight from the Mercedes GLK, open the bonnet to detach the plastic cover on the top of the headlight. This will allow you to …
How to Replace the Front Headlight Bulbs on Mercedes GLK Series
How to Replace the Front Headlight Bulbs on Mercedes GLK Series
Mercedes Glk (2008-2015 / MK 1) Open the bonnet by pulling the lever located at the bottom right of the dashboard (if present) and secure it with the prop. Locate the inspection cap…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos