Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Glk
    4. : How to replace the headlight bulbs of a Mercedes Glk

Mercedes Glk - Video tutorial

Model: Mercedes Glk MK 1 - Years 2008-2015
Part: Headlight bulb
Operation: How to replace the headlight bulbs of a Mercedes Glk

Burnt out bulbs and need to be replaced? Let's see how to proceed with the replacement. We open the front hood by pulling the lever located at the bottom right of the dashboard, let's put it in safety with the rod. We find the inspection cap of the headlight (located in the rear part of the headlight) and remove it. We will find the bulbs with metal hooks; we take out the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We connect the power terminals and test the bulbs.


Posted on 30 November 2023 by ScegliAuto



How to replace headlight bulbs on Mercedes Serie Glk
Mercedes Glk (2008-2015 / MK 1) Let's see how to replace the headlight bulbs on Mercedes Glk Series: open the front hood by pulling the lever located at the bottom right of the dash
How to replace head bulbs on Mercedes Glk
Mercedes Glk (2008-2015 / MK 1) Replacing the bulbs inside the front headlight of the Mercedes Glk, let's see or disassembly. Unhook the front hood by pulling the lever at the botto
How to replace the headlight bulb on the Mercedes GLK?
Mercedes Glk (2008-2015 / MK 1) In order to replace the headlight bulb on the Mercedes GLK, the car must first be jacked up. Next, you will need to remove the bolts securing the whe

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos