Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located in the Mercedes E-Class W212?

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Checks and maintenance

If you own a Mercedes E-Class W212 and want to locate the OBD port, all you have to do is pay attention to the following procedure and then put it into practice. First, enter the interior of the car and reach the driver's seat. Make sure the car is turned off and then shift your focus to the bottom of the dashboard. At this point, locate the OBD port on the left side and remove the protective cap to have access to it. Finally, connect a diagnostic tool if necessary.

Posted on 3 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Mercedes E-Class W212 located?
Where is the OBD port of the Mercedes E-Class W212 located?
Mercedes Classe E (2009-2016 / W212) .. The OBD port of your Mercedes E-Class W212 is located inside the cabin and in this new guide we will describe the steps you need to take.. …
Where is the OBD port located in the Mercedes E-Class W212?
Where is the OBD port located in the Mercedes E-Class W212?
Mercedes Classe E (2009-2016 / W212) .. To locate the OBD port of your Mercedes E-Class W212 on your own, all you need is a few seconds. All you have to do is follow the steps described.. …
Where is the fuse box of the Mercedes E-Class W212 located?
Mercedes Classe E (2009-2016 / W212) .. locate the fuse box inside your Mercedes E-Class W212. First, you need to reach the rear area of the car, then fully lift the hood and shift your.. …

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos