Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the factory radio from a Mercedes A-Class W169

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
This video is currently unavailable

In this video, we will see how to remove the factory radio from a Mercedes Class A W169: we will need a plastic spatula to remove the frame that contains the ventilation nozzles, from which we will have to disconnect the electrical connector; now we can remove the two visible screws under the radio and the two we discovered by removing the frame with the ventilation nozzles.

We extract the radio, which is a block of a certain size, and remove the electrical connector located in the back, as well as the antenna connection.

Now we can replace it with one of the countless Android solutions that we can find on the market.


Posted on 8 November 2025 by ScegliAuto


Related tutorials

How to Replace Fuses on Mercedes A-Class (W169)
Mercedes Classe A (2004-2012 / W169) .. To replace the fuses on a Mercedes A-Class W169, first locate the exact spot where the fuse box is located. Unlike other vehicles where finding.. …
How to remove the car radio from the Mercedes Class A W169
Mercedes Classe A (2004-2012 / W169) To easily remove the factory car radio in your Mercedes Class A W169, you must follow the steps described below. First, go inside the car and make su…
How to replace the key battery in the Mercedes A-Class W169
How to replace the key battery in the Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. the battery inside the key of your Mercedes A-Class W169. First, make sure you have a new CR2032 battery and then proceed to remove the emergency key.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos