Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue warning light on the Mercedes A-Class?

Model: Mercedes Classe A W177 - Years 2018-2026
Part: AdBlue warning light

The AdBlue warning light on the Mercedes Class A can be completely turned off by opening the fuel flap of the car, allowing you to locate the blue cap next to the fuel cap. Once this blue cap is removed, it will be possible to add the necessary amount of fluid into the tank to fill it up. After the refill is complete, you need to close the cap and also the fuel flap: once it has been closed, you should turn on the ignition to check that the warning light has disappeared.

Posted on 30 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Mercedes A-Class?
How to Reset the Service Light on a Mercedes A-Class?
Mercedes Classe A (1997-2004 / W168) .. You can reset the Service light on a Mercedes A-Class by pressing and holding the 000.0 button located on the left side of the instrument cluster while.. …
How do you top up AdBlue on the Mercedes A-Class?
How do you top up AdBlue on the Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. top up additional AdBlue fluid on the Mercedes Classe A, you need to open the fuel filler flap, located on the rear left side of the car: by opening.. …
How to Reset the Service Light on a Mercedes A-Class?
How to Reset the Service Light on a Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. On the Mercedes A-Class, you can completely eliminate the Service light by turning on the ignition and navigating through.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos