Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock in the Mercedes Citan?

Model: Mercedes Citan MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Clock

See other generations:
Video tutorial

At least twice a year, we have to perform this operation, specifically when switching from standard time to daylight saving time and vice versa, unless there is a need to reset the clock due to, for example, disconnecting the 12-volt battery that powers the vehicle.

In any case, updating the time is not a complicated operation, and you can do it yourself in the way described here: with the instrument panel turned on, press and hold the multifunction button to the right of the panel, access the time settings, and with the same button, adjust the Hours first and then the Minutes.

At the end, hold the button again for a few seconds to save the changes.


Posted on 27 December 2025 by ScegliAuto


Related tutorials

How to Set the Clock on the Mercedes Citan?
How to Set the Clock on the Mercedes Citan?
Mercedes Citan (2012-2020 / MK 1) To set the clock on the Mercedes Citan, turn on the instrument panel with the appropriate key: this will allow you to navigate the menu on the onboar…
How to Reset the "Service" Light on a Mercedes Citan
How to Reset the "Service" Light on a Mercedes Citan
Mercedes Citan (2012-2020 / MK 1) This procedure must be performed after the service has been completed. Before you start, activate the instrument cluster of your Mercedes Citan by tu…
Where is the OBD Port on the Mercedes Citan?
Where is the OBD Port on the Mercedes Citan?
Mercedes Citan (2012-2020 / MK 1) If you are having trouble locating the OBD port inside your first-generation Mercedes Citan, do not worry as the following description outlines all t…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos