Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mercedes Citan

Model: Mercedes Citan MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

The following video tutorial shows the steps to reset the service light on a Mercedes Citan van. To reset the light, press the menu button on the dashboard to access the service menu. When the "service" option starts flashing on the display, release the button and press it again for a few seconds to initiate the update and complete the reset procedure.

If the reset fails, it will be necessary to go to an authorised workshop for a diagnostic check. Remember to perform the reset steps only after carrying out the necessary checks and maintenance on the vehicle.


Posted on 5 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mercedes Citan
How to Reset the Service Light on a Mercedes Citan
Mercedes Citan (2012-2020 / MK 1) The illumination of the service light indicates that maintenance and oil change operations are required. To reset the light, you must first complete …
How to Reset the Service Light on the Mercedes Citan?
How to Reset the Service Light on the Mercedes Citan?
Mercedes Citan (2012-2020 / MK 1) Resetting the service light on the Mercedes Citan van is straightforward and intuitive. First, sit in the driver's seat and turn on the ignition by t…
How to Reset the Service Light on the Mercedes Citan
How to Reset the Service Light on the Mercedes Citan
Mercedes Citan (2021-2026 / W420) On the Mercedes Citan, the reset procedure starts with the ignition on, so the dashboard display is active and you can access the menus. The video sh…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos