Do it yourself
| ||||
|
Mercedes Vito - Video tutorial
Model: Mercedes Vito
W639, MK 2
- Years 2003-2013 Here are the tips for replacing the battery in your Mercedes safely. First, let's make sure you have engaged the handbrake. Then we go to act under the driver's seat. We unscrew the safety lever of the door that covers the compartment of the battery to be replaced, and we will disengage the same. With a 10mm wrench unscrew the bolts that block the plate that immobilizes the battery, extract it paying attention to the acid vent tube. We unscrew the nut that connects the cable to the battery in order to be able to act comfortably also on the second nut. After having removed the second clamp from its seat, we can finally place the new spare part.
Posted on 15 November 2023 by ScegliAuto
How to remove the battery of a Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) Before starting, we will have to open the driver's side door of our Mercedes Vito. So let's start by disengaging and removing the side cover of the b
How to replace the battery in the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) Today we will see, in this short and simple guide, the steps that will allow us to disassemble and replace the battery of the Mercedes Vito. First of
How do you replace the battery on the Mercedes Vito?
Mercedes Vito (2003-2013 / W639, MK 2) In order to replace the battery of the Mercedes Vito, it is necessary to remove the plastic cover located on the left side immediately under the driv Other guides that may interest you
|
Frequently Asked QuestionsHow do you replace the horn on the Citroà «n Berlingo?In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |