|
Do it yourself
| |||
| ||||
How to Register TPMS IDs on a Mercedes-Benz C-Class W205
Model: Mercedes Classe C
W205
- Years 2014-2021
Let's see how to register the TPMS sensor IDs on a Mercedes-Benz C-Class: connect the vehicle to an external power source to ensure stable voltage during the operation. Verify that you have a stable Internet connection and that the Mercedes-Benz software on the diagnostic tool (iSCAN) is updated to the latest version. Before installing the new sensor, note its ID, which is found on a paper label attached to the sensor or printed directly on the sensor itself. Access the ADAS diagnostic group and read the TPC (Tire Pressure Control) data stream. From here, extract the IDs of all sensors currently mounted on the vehicle. For safety, email yourself the ID report to keep a copy for reference. Using the iSCAN tool, access the TPMS sensor registration function. Enter the new ID of the sensor just installed. You must also enter all other IDs of already present sensors (even if they have not been changed), as the control unit needs the complete list. After entering all IDs, start the synchronization procedure and verify that the control unit correctly recognizes the new sensors. Check on the vehicle display that the tire pressures are shown for each wheel, then after disconnecting the tool, perform a short road test to ensure the TPMS system is functioning correctly.
Posted on 17 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe C
(2014-2021 /
W205)
.. dedicated to all of you who own a Mercedes C-Class W205, we will help you safely locate the OBD2 port inside the cabin. Thanks to it, you can connect.. …
Mercedes Classe C
(2014-2021 /
W205)
Today's instructions will show you how to reset the tire pressure warning on the Mercedes C-Class. Before resetting the TPMS sensors, ensure that all…
Mercedes Classe C
(2014-2021 /
W205)
.. to change the cabin air filter in your Mercedes-Benz C-Class W205 (2014-2021), follow the steps below. First, completely turn off your Mercedes-Benz.. …
Other guides you may be interested in
|
How to Adjust the Handbrake on a BMW 1 Series?
To adjust the handbrake on a BMW 1 Series, use a tool to pry off the leather cover that wraps around the base of the handbrake lever. Once this cover is removed, you will be able to locate the spring that regulates the handbrake tension. At this point, adjust the nut located at the base of the spring: tightening the nut will make the handbrake firmer and reduce the lever's travel. Conversely, loosening the nut will decrease the handbrake's firmness and increase the lever's travel. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.448
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |