Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Alternator of a Mercedes Vehicle

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Alternator

See other generations:
Video tutorial

Note that the method shown in the video and described below was performed on a Mercedes C-Class, but it is also applicable to other vehicles from the same manufacturer. The message on the instrument panel indicating a problem with the aforementioned alternator may be related to an intermittent and temporary fault, so it is not necessarily a structural defect.

Therefore, you can attempt a complete reset by disconnecting the 12-volt battery that powers the vehicle. To do this, disconnect the negative terminal, which is black, wait a few seconds, and then reconnect it.


Posted on 20 June 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) To replace the alternator on a Mercedes C-Class, open the hood to access the components inside the engine bay. At the front, on the lower left, you w…
Mercedes Classe C (2007-2013 / W204) Is the alternator out of order? Let's see how to remove the alternator on a Mercedes C-Class. Open the hood, disconnect the battery terminals for saf…
Mercedes Classe C (2007-2013 / W204) Follow these main instructions to remove and replace the alternator on a Mercedes C-Class. First, open the hood and disconnect the battery. Next, rem…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos