|
Do it yourself
| |||
| ||||
How to Replace the Driver Side Window Switch on a Mercedes SL 500 R230
Model: Mercedes Sl
R230
- Years:
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Video tutorial
Replacing the window switch on the Mercedes SL 500 R230 first requires purchasing the new part, which you can find on Amazon with the code B0FPQ6HK9Y for $25.00 plus $3.00 for shipping. Start by removing the plastic door panel: remove the Torx T15 screws (one at the top, one at the bottom). Carefully pry off the panel with a plastic tool. Inside, remove the support bracket with two Torx T20 screws and one additional small Torx T10 screw. Remove the bracket. Now, unscrew the three Torx screws that secure the handle with the switch. Pull out the handle and disconnect the electrical connector (cutting the ties if necessary). To remove the old switch from the handle, release the two side clips with needle-nose pliers. Insert the new switch (with its wiring) into the handle, reattach the clips, and reposition everything. Reconnect the wiring and secure it with new ties. Reassemble the bracket and the panel, tightening the screws. Then, test the operation of the window lifts.
Posted on 8 July 2026 by ScegliAuto
Related tutorials
Mercedes Sl
(2001-2011 /
R230)
Let's see how to change the time on a Mercedes SL R230: press the "menu" button on the steering wheel (or on the center console, depending on the tri…
Mercedes Sl
(2001-2011 /
R230)
Despite what you might think, completely removing the stock radio from your Mercedes SL R230 is a maintenance task that you can easily perform on you…
Mercedes Sl
(2001-2011 /
R230)
In this video tutorial, you will learn how to remove and replace the rear bumper of a Mercedes SL R230. First, remove the screws located on both side…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Spare Wheel from the Citroen C4 Picasso
Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |